Needed Downloads For Updating Samsung Galaxy Ace 3 LTE S7275R Firmware:
- Samsung Galaxy Ace 3 LTE S7275R Stock Firmware Package.
- Odin Flasher.
- Samsung Galaxy Ace 3 LTE S7275R USB Drivers.
Needed Tools For Updating Samsung Galaxy Ace 3 LTE S7275R Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.
Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.
Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).
Samsung Galaxy Ace 3 LTE S7275R Firmware Update Steps:
- Turn off the device, And take out its battery, SIM and memory cards.
- Samsung Galaxy Ace 3 LTE S7275R Stock Firmware Package.
- Odin Flasher.
- Samsung Galaxy Ace 3 LTE S7275R USB Drivers.
Needed Tools For Updating Samsung Galaxy Ace 3 LTE S7275R Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.
Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.
Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).
Samsung Galaxy Ace 3 LTE S7275R Firmware Update Steps:
- Turn off the device, And take out its battery, SIM and memory cards.
- Run Odin3.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: S7275R_signed_LOGAN_8G_OPEN_130809.pit
- Firmware files selection:
Click Bootloader button to select: BOOTLOADER_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click PDA button to select: CODE_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click CSC button to select: CSC_Oxx_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
Click Bootloader button to select: BOOTLOADER_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click PDA button to select: CODE_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click CSC button to select: CSC_Oxx_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.
- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.
- Wait until Windows detects the connected device and installs its suitable USB drivers.
- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).
- Click on Start button.
- Odin program will start installing the new firmware files into your device, So wait until the device reboots.
- If the update was successfully done, Then you will notice PASS! Word at Odin program.
- Disconnect the USB cable.
- Check your device firmware version *#1234# (You should see the new installed one).
- Turn off the device again, Reinsert the SIM and memory cards and turn it on.
- Now you can customize your device after installing the new firmware version.
- If you made any backup of your device data before the update then you can restore it again.
- Done.
Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.
0 comments:
Post a Comment